12 oz SUBLIMATION white straight sippy cup insulated tumbler. — Bulk Tumblers

Finally! A straight sided sublimation sippy cup with a  screw-on lid! Silicone lid insert helps prevent spills, and straight sides make the most of your design!   USING A MUG PRESS:Note: The recommended settings above may need adjustments for best results.Settings will vary depending on the mug press brand and model in

Finally! A straight sided sublimation sippy cup with a  screw-on lid! Silicone lid insert helps prevent spills, and straight sides make the most of your design!

USING A MUG PRESS:

Note: The recommended settings above may need adjustments for best results.
Settings will vary depending on the mug press brand and model ink and paper
and atmospheric conditions.

2nd Note: Settings are based on a GKDK3 mug press by George Knight.

3rd Note: Be sure that the artwork does not go beyond the size limits of the
mug press.

Supplies needed:
- sublimatable substrate (mug)
- sublimation transfer
- scratch paper
- heat tape

Mug heat press settings:
- temperature - 380 degrees F
- dwell time - 1:00 to 1:15 minutes
- pressure - light to medium

Steps:
1. cut your transfers so that the transfer is slightly larger vertically than
the mug.
2. Position the substrate onto the transfer.
3. Tape two ends of the transfer near the handle of the mug using the heat
tape.
4. Wrap a piece of scratch paper around the transfer and mug taping if
necessary.
5. Center the transfer and mug in the mug press.
6. Close the mug press using the mug heat press settings above.
7. Remove items from the press immediately. Use heat resistant gloves if
necessary - the items will be very hot.
8. Remove transfer and scratch paper.

Tips:
- If the image of the final product appears light increase the pressure or
the dwell time slightly (10-15 seconds).
- If the image on the final product appears blurred or substrate appears
yellowed or has brown spots on the rim of the top or bottom of the mug reduce
the dwell time slightly (10-15 seconds).
- Too much pressure can cause trapped moisture in the paper to jet away
pulling ink with it in a spiked-peaked formation. To avoid this reduce the
pressure.


USING A WRAP AND A CONVECTION OVEN:
Note: The recommended settings above may need adjustments for best
results. Settings will vary depending on the oven brand and model ink and
paper and atmospheric conditions.

Supplies needed:
- sublimatable substrate (mug)
- wrap
- sublimation transfer
- scratch paper
- heat tape

Mug heat press settings:
- temperature - 400 degrees F
- dwell time - 4:00 - 4:30 minutes

Steps:
1. cut your transfers so that the transfer is slightly larger vertically than
the mug.
2. Position the substrate onto the transfer.
3. Tape two ends of the transfer near the handle of the mug using the heat
tape.
4. Wrap a piece of scratch paper around the transfer and mug taping if
necessary.
5. Place the wrap onto the mug and snap closed.
6. Place in oven and use the settings above.
7. Remove items from the oven and remove wrap transfer and scratch paper. Use
heat resistant gloves if necessary - the items will be very hot.


Tips:
- If the image of the final product appears light increase the pressure or
the dwell time slightly (10-15 seconds).
- If the image on the final product appears blurred or substrate appears
yellowed or has brown spots on the rim of the top or bottom of the mug reduce
the dwell time slightly (10-15 seconds).

Sublimation Sippy Cup Pack

Sublimation Sippy Cup Pack

Ving 30 Pack Bulk 12oz Sublimation White Blank Straight Sippy Cups Tumblers with Handles Double Wall Stainless Steel Insulated Bottle for Kids Baby

VING 30 Pack 12 OZ Sublimation White Blank Kids Sippy Cups Tumbler with Two Handles, Double Wall SS Vacuum Insulated Baby Bottle, With handles design,

VING 30 Pack Bulk 12oz Sublimation White Blank Straight Sippy Cups Tumblers with Handles Double Wall Stainless Steel Insulated Bottle for Kids Baby

12oz Blank Sublimation Sippy Cup for Children White Straight Stainless steel Kids Drinking Tumbler Sport Water Bottles with Handle

20oz Straight Tapered Blank White Sublimation On Tumblers With Lid And Straw Stainless Steel Vacuum Insulated Sippy Cup From Hot Wind, $4.08

DIY to Show Personality: you can print any figures, image, text on quality sublimation coating of blank tumbler to show your personality; Slim

24 Pack 12 oz Sublimation Blanks Tumbler Bulk Stainless Steel Straight Skinny Slim Tumblers with Lids Double Wall Vacuum Insulated Travel Mug Cups

12 Oz Sublimation Grow Up Straight Sippy Cup – IDC Emporium

12 Sets 12 oz Sublimation Blanks Sippy Cups for Toddlers Insulated Stainless Steel Kids Sublimation Tumbler Cups with Lids and Straws, 2 Heat Tape, 12 Polymer Sublimation Coating, Coaster, Brush : Baby

12oz Blank Sublimation Sippy Cup for Children White Straight Stainless steel Kids Drinking Tumbler Sport Water Bottles with Handle

12oz Blank Sublimation Sippy Cup for Children White Straight Stainless steel Kids Drinking Tumbler Sport Water Bottles with Handle

Makerflo Sublimation tumblers are made for crafting! They make for a perfect gift for your family, friends and loved ones. Be it Birthdays, anniversary, house warming, Thanksgiving, Christmas, Valentine's Day, or Secret Santa, these make for a thoughtful & creative gift. Moreover these can be customized to add a personal touch making every gift even more special.

12oz Sippy Cup Duo - Sublimation

Sublimation Sippy Cup Pack