17 DEGREE Folding Cone, DELRIN, 1/4″ inch to 3/4″ inch Hole Sizes Folding Range – Legacy Brand Coin Ring Tools
Universal 17 degree folding cone machined from Delrin. Use this tool with any brand of coin ring reduction dies to fold coins with holes from 1/4″ inch (0.25″) to 3/4″ inch (0.75&…
Universal 17 degree folding cone machined from Delrin.
Use this tool with any brand of coin ring reduction dies to fold coins with holes from 1/4 inch (0.25) to 3/4 inch (0.75).
This is a direct replica of our popular stainless steel cone made from detail protecting Delrin plastic.
Use this Delrin folding cone to help preserve the inner detail of coins when folding. Punched holes should be deburred and free of sharp edges before using your Delrin folding cone.
For coins that are not 99% silver, it's important to remember that Delrin cones should not be your primary folding cone.
Ringers should use a steel cone for the majority of the fold and then transition to the delrin cone for the last little bit where you would get the most metal to metal contact.
And remember to always anneal your coins during the folding process.
Use in your hydraulic press or arbor press. Not for use in ring sizing machines, due to tool height and the lack of clearance.
One Universal Folding/Reduction Die .9″ x 1.0″ @ 17 degrees – Coin
Size 14 Coin Ring
Coin Ring Wall Straightening Tool
Vise Coin
17-degree MEGA Universal Folding Cone, Stainless Steel, for 1/4
Coin Ring Folding Dies – Legacy Brand Coin Ring Tools
17 Folding Die
for Coin Rings, Straighten the walls of your Swedish Wrap coin rings with this 13 piece straightening set by Legacy Brand coin ring tools. Use
Legacy Brand Coin Ring Wall Straightening Set
17 DEGREE Folding Die EXTRA LARGE (1.7″ x 1.8″) for making coin
One Universal Folding Reduction Die 1.3″ x 1.4″ @ 17 degrees
17-degree MEGA Universal Folding Cone, Stainless Steel, for 1/4
DELUXE Swedish Wrap Die Set (3 dies, 12 double sided push rods) – Legacy Brand Coin Ring Tools
Tool to Make Coin Rings
Sanding Cone
Stanless Steel Starter Folding Cones Heat Treated 17-4 Stainless Steel
3 Stainless Steel Stabilizing Folding Cones(20,30,40 Degrees) Plus 1 Spacer
