McFeely's #5F-6Rx1 in. Slot Bit-.232 Wx.036 Thick, Wire Detent HSH-0610 (1) Each
In most slotted screw driver bits, the tip is beveled which greatly reduces the surface area of the driver bit in contact with the screw's slot. Result: these inferior bits are notorious for slipping out of the slot which often destroys the slot and damages the wood around the screw. McFeely's bits are different. The driving surfaces on these hollow-ground bits are parallel to improve the fit and reduce cam-out.
Choose the correct bit based on the following table:
SKU | For Screw Size (a) | Bit Length | Detent Type |
---|---|---|---|
HSH-0310 | #2F - #3R | 1 in. | Wire |
HSH-0320 | #2F - #3R | 2 in. | Ball |
HSH-0410 | #3F - #4R | 1 in. | Wire |
HSH-0420 | #3F - #4R | 2 in. | Ball |
HSH-0510 | #4F - #5R | 1 in. | Wire |
HSH-0520 | #4F - #5R | 2 in. | Ball |
HSH-0610 | #5F - #6R | 1 in. | Wire |
HSH-0620 | #5F - #6R | 2 in. | Ball |
HSH-0810 | #6F - #8R | 1 in. | Wire |
HSH-0820 | #6F - #8R | 2 in. | Ball |
HSH-1010 | #8F - #10R | 1 in. | Wire |
HSH-1020 | #8F - #10R | 2 in. | Ball |
HSH![]() Pin Socket (2.54mm, Straight, 2x6 Way) ![]() 31MM Axle Nut Socket (6 Point) – ARES Tool, MJD Industries, LLC ![]() 2213932-2 : Buchanan WireMate Surface Mount TB Headers ![]() Low Alloy Steel - Aimtek, Inc. Features: 2 shanks for your option: 6.35mm or 6mm. Flush trim endgrain of any direction for a perfect finish-. For use on table mount and handheld ![]() 1/4 Inch Shank Top Bearing Spiral Pattern/Plunge Flush Trim Router Bit for Wood ![]() Item # S0116-KT32, 1-1/4 Inch (in) Size 316-NM Stainless Steel Shackle Bolt On Lexco Cable Manufacturers ![]() Tool Steel Hardfacing TIG Rods HF6 - 1.6 mm x 12 Rod Pack - Welding & Welder ![]() 1/4 Inch Shank Top Bearing Spiral Pattern/Plunge Flush Trim Router Bit for Wood ![]() Spring Wire, Carbon Spring Wire T-Slot Cutters: Cutting Dia.: 30mm / 1.18; Cutting Depth: 5mm / 0.2; Shank Dia.: 16mm / 0.63; Total Length: 100mm / 3.94; Number of Flutes: 6 ![]() uxcell T-Slot Milling Cutters, 5mm Depth 30mm Cutting Dia 16mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum ![]() 36mm 1/2 Drive Deep Impact Socket - Newsome Quality Tools
Related products
You may also like
|