E6000® Plus Adhesive With 2 Snip-tips 26ml or 56ml No Odor, Works on Wood, Glass, Fabric, Ceramic, Gems, Metal, Most Plastics & More

This Adhesives item by Crystalidea has 128 favorites from shoppers. Ships from Lithuania. Listed on 24 Jan, 2024
E6000® Plus+ offers virtually the same performance characteristics you love about E6000 but without the odor! It's formulated using a premium polymer technology and can be used on most any substrate and in just about any application. The waterproof formula and all-weather performance make E6000 Plus+ ideal for indoor and outdoor applications. Excellent adhesion to wood, glass, fabric, ceramic, gems, metal, marble, fiberglass, concrete, most plastics, Lexan and much more. • No odor. • Crystal clear. • Superb UV resistance. • Paintable. • Remains flexible after curing. • Maintains it's permanent bond strength. • Washer-dryer safe. • Acid-free. USAGE: test small area for adhesion before use. Surface should be clean, dry and free of dirt. For best adhesion on smooth, non-porous materials, lightly roughen surface before use. Ideal application temperature range is 50 to 90 ºF (10 to 32 ºC). Once fully cured, the adhesive can withstand temperatures from -40 to 200 ºF (-40 to 93 ºC) intermittently. 1. Puncture seal in neck of tube using pointer cap. 2. Apply directly to surfaces to be bonded or repaired. NOTE: for non-porous surfaces, apply adhesive, mate surfaces together, pull apart for 5 minutes, then re-mate surfaces permanently. 3. To close tube properly, remove air in the tube by squeezing product slightly past end of the opening, then tightly recap. Dried product can easily be removed. 4. Allow 24 hours for full cure. Depending on substrates and temperature, maximum bond strength may not be reached for up 72 hours. 5. Clean uncured adhesive with rubbing alcohol, mineral spirits, acetone or a dry cloth. Cured material may be removed with mineral spirits or by cutting or scraping. 6. Not recommended for use on acrylic, vinyl, foam, polyethylene and polypropylene. 7. Store in a cool, dry place. Tip: for quick emergency repairs, lightly mist the substrate with moisture prior to applying adhesive.

E6000 3.7 Ounce (109.4mL) Tube Industrial Strength Adhesive for Crafting, 10 Snip Tip Applicator Tips and Pixiss Art Dotting Stylus Pens 5 pcs Set : Arts, Crafts & Sewing

E-6000 Plus Adhesive is formulated using a Premium Polymer Technology, offering virtually the same performance as E-6000, but with No Odor. It is Self-Leveling, dries Cryltal Clear, and has superb UV Resistance. It is Paintable, Permanent, stays Flexible, and is Acid Free & Washer-Dryer Safe. E-6000 Plus can be used on most any substrate and just about any application. The Waterproof formula and All-Weather Performance make E-6000 Plus excellent for Indoor or Outdoor Applications.

E6000+Plus Multipurpose Adhesive EU Compliant 26.6ml Clear

RLECS 20pcs Snip Tip Applicator Adhesive Tube Tips Cap for E6000 Craft Glue 3.7 Ounce Adhesive Tubes, White

E6000 PLUS offers virtually the same performance characteristics you love about E6000 but without the odor It is crystal clear, offers superb UV

Eclectic 570110, Clear 0.9 Fl Oz E6000+Plus Multipurpose Adhesive-0.9oz, 0.9 oz

E6000 Clear 1.9 Fl Oz Plus Multipurpose Adhesive-1.9oz

Glue Dispensing Replacement Snip Tips Fits 3.7oz E6000 Adhesive Tube

E6000 Eclectic Products inc. Plus Multi-purpose Clear Glue, Waterproof and Paintable, Strong Flexible Craft Adhesive for Wood, Glass, Fabric, Ceramic, Metal and More, 26.6ml

E-6000 Glue Clear, DIY Crafts, Glue for Craft, Multi Purpose Glue, Transparent

E6000 Craft Adhesive 3.7 oz (Pack of 2) : Arts, Crafts & Sewing