Wire, 4-Conductor, 28 AWG – ToneShapers

4-conductor wire as used in many modern humbuckers. Black/white/red/green inner conductors (28 AWG), plus a bare drain wire. Made in USA.
This is 4-conductor wire as used on many humbucking pickups. Price shown is per foot, add as many feet to your cart as you'd like. If you add 50 feet or more, 20% will be deducted from the price. If you add 100 feet or more, 30% will be deducted. This wire has four 28 AWG insulated conductors (red/white/black/green), plus an uninsulated wire, all running through a shielded outer jacket. It is by far the most convenient way to wire the switch in a Les Paul to the volume pots and jack. The bare wire is in contact with the shielded outer jacket (which is lined with aluminum-coated mylar), so connecting the bare wire to any ground means that the outer jacket - or sheath - is grounded, and all four insulated conductors are shielded from unwanted sources of EMI/RFI (noise - radio signals, magnetic fields, etc.). The purpose is to keep unwanted noise from getting into your signal. We assume you don't want unwanted noise in your signal (there's a pun in there somewhere) Each of the 4 conductors is 28 AWG 7/36, meaning it's seven strands of 36 AWG wire twisted together, so the overall wire gauge is 28 AWG.

The Polaris IPL3/0-4B Multi-Tap Single Side Entry Connector features 4 ports sized for 3/0-6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies.

Polaris IPL3/0-4B 3/0-6 AWG Bagged Insulated Multi-Tap Connector, Black

LEIGESAUDIO 20 Feet 9 Conductor Speaker Wire/Cable

FIRMERST 14 Gauge 4 Conductor 30 Feet Tinned Copper Electrical

Safe, dependable, and easy. No other connector offers as much as the B-TAP Insulation Piercing Connector.

Buchanan BTC500-4 Piercing Tap Connector

1061-28-7-0, 41% OFF

22 Gauge 4 Conductor Communication and Control Cable

ToneShaper Wiring Kit, Fender Jaguar – ToneShapers

ToneShaper CORE Switch, 4-Way – ToneShapers

The finest OEM component brands – the RIGHT parts for your application All hardware included, and it's the right hardware - you'll have everything you

ToneShaper Guitar Wiring Kit, For Fender Telecaster, SS3 (4-Way ToneShaper Wiring)

QTY: 1 Ten / 10 Ft Piece (Order 20 ft add QTY of 2, 30 ft add QTY of 3 etc. Wire will be Sold As One Continuous Length) Heavy Duty High Performance

LASE 10 AWG Gauge 4 Conductor Heavy Duty Speaker Wire (Sold in 10 Ft Increments)

4 cores Signal Line Shielded Wire Multi-core 4 core 26 AWG 28 AWG Tinned Copper Headphone Cable Audio PVC Black Control Cable