The 6 Class-A Wall Thimble is used for through-the-wall chimney installations. It protects the wall as the chimney passes safely through to the outside and provides a finished look to the framed opening on the inside. The Wall Thimble can adjust to accommodate walls from 6 to 10 inches thick.
Allfuelhst Wall Thimble for 6 inch Diameter Chimney Pipe
AllFuel HST 11-Inch Square Ceiling Support Box for 6-Inch Inner Diameter Chimney Pipe
ALLFUEL HST 6 in. x 1 in. Anchor Plate for Double Wall Chimney
Roof Support Kit for 6 Inner Diameter Chimney Pipe
The roof support bracket is used for A-frame and cathedral ceiling homes where a Ceiling Support Box is not desired or required. The roof support mounts to the framing and can support a total of 45 feet of chimney with a maximum of 20 feet below the support. An Extended Roof Brace (sold separately) is often used in conjunction with a Roof Support to provide lateral stability above the roof. Age.
AllFuel HST Roof Support for 6 inch Double Wall Chimney Pipe
6 Inner Diameter x 18 Long Double Wall Chimney Pipe – AllFuel HST
Elbow Strap for 6 Inner Diameter Chimney Pipe – AllFuel HST
SuperVent 11-Piece Chimney Pipe Accessory Kit for Wall Support in
AllFuel HST 7/12-12/12 Roof Flashing Chimney Pipe Accessory Kit
Our through the wall kit should be used whenever venting through the ceiling is not an option or is not desired. Note: venting straight up through the ceiling is always recommended for the strongest possible draft. This kit includes all the components you need to connect the single wall stove pipe to Class-A double wall insulated pipe, pass through an exterior wall, make a 90 ° turn, and top off the installation with a chimney cap. To complete this kit purchase the lengths of 8 in.
Through The Wall Kit for 6 Chimney Pipe with Chimney Cap
AllFuel HST Through The Wall Kit with Spark Guard
Selkirk Metalbestos Class A Insulated Chimney Pipe - Rockford Chimney
AllFuel HST Wall Thimble for 6 Diameter 304 Stainless Steel All