WOD Kapton Tape 2 Mil, Ships Today - Multiple Sizes - Tape Providers

Polyimide Film Tape is a 2 mil electrical grade coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. Available in Multiple Sizes.
Kapton Polyimide Film TapesProduct DescriptionWOD PKT2 Kapton™ Polyimide Film Tape is a 2 mil electrical grade Kapton alternative POLYIMIDE film coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive will thermoset to increase adhesion values.WOD PKT2 Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining and water immersion.The Adhesive Employs a proprietary technology that results in extremely low electrostatic discharge at unwind and removal from the PWB. Conventional polyimide tapes can typically generate over 10,000 volts during use which can damage board mounted electronic components. WOD tape PKT2 overcomes this problem without any of the typical drawbacks of conventional "anti-static" or "static-free" tapes (e.g., variable adhesion and opaqueness).Product ApplicationsPrimarily used in electrical insulation and gold finger protection.Protects gold tabs in circuit boards during soldering.Protects surfaces helping reduce replacement partsUsed in electrical applications such as harness/coil wraps & separators, transformers & slot liners where good insulation & heat resistance are required.electrical insulation applications this product does meet class H requirementsTechnical PropertiesAdhesive: High performance siliconeCarrier/Backing: Electrical grade polyimide filmThickness: 3.5 mils (carrier, adhesive)Adhesion: 27.4 ounces per inch (to stainless steel test panel)Tensile Strength: > 36.5 pounds per inch (longitudinal)Dielectric Strength: > 8,000 voltsElongation: > 70%Service/Operating Temperature: up to 392°FSpecification Met: MIL-P-46112B; UL510 approved for flame retardanceCore: 3" DiameterAdditional InformationAlternative to: Electro Tape 95-2; Ideal 9322; T&F 3903; American 304-2; Anchor K-350; Permacel P-222; Taconic 6325-02; Berry Plastics 2345-2; Tesa 4429; Dewal 303-2.Note: Specifications are those given by manufacturers and are not tested for accuracy.

Kapton Polyimide Film Tapes

Product Description

WOD PKT2 Kapton™ Polyimide Film Tape is a 2 mil electrical grade Kapton alternative POLYIMIDE film coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive will thermoset to increase adhesion values.

WOD PKT2 Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining and water immersion.

The Adhesive Employs a proprietary technology that results in extremely low electrostatic discharge at unwind and removal from the PWB. Conventional polyimide tapes can typically generate over 10,000 volts during use which can damage board mounted electronic components. WOD tape PKT2 overcomes this problem without any of the typical drawbacks of conventional anti-static or static-free tapes (e.g., variable adhesion and opaqueness).

Product Applications

• Primarily used in electrical insulation and gold finger protection.
• Protects gold tabs in circuit boards during soldering.
• Protects surfaces helping reduce replacement parts
• Used in electrical applications such as harness/coil wraps & separators, transformers & slot liners where good insulation & heat resistance are required.
• electrical insulation applications this product does meet class H requirements

Technical Properties

• Adhesive: High performance silicone
• Carrier/Backing: Electrical grade polyimide film
• Thickness: 3.5 mils (carrier, adhesive)
• Adhesion: 27.4 ounces per inch (to stainless steel test panel)
• Tensile Strength: > 36.5 pounds per inch (longitudinal)
• Dielectric Strength: > 8,000 volts
• Elongation: > 70%
• Service/Operating Temperature: up to 392°F
• Specification Met: MIL-P-46112B; UL510 approved for flame retardance
• Core: 3 Diameter

Additional Information

Alternative to: Electro Tape 95-2; Ideal 9322; T&F 3903; American 304-2; Anchor K-350; Permacel P-222; Taconic 6325-02; Berry Plastics 2345-2; Tesa 4429; Dewal 303-2.

Note: Specifications are those given by manufacturers and are not tested for accuracy.

WOD Electrical Tape is a 19mm wide Plasticized PVC film with an aggressive rubber-based adhesive in OSHA colors; rolls are individually cello-wrapped and labeled. It is a UL/CSA 1.5 in. listed core. Flame retardant and cold resistant! Whether you are re-wiring, installing, splicing your home electrics, working on electrical projects, or just choosing a creative, economical way to decorate your home, office, or car.

Wod El-766aw Professional Grade Electrical Tape General Purpose Black UL/CSA Listed Core: 1.5 inch x 66 ft - Use at No More Than 600V & 176F

WOD PKT1 Kapton Tape goes beyond ordinary expectations with its high-performance silicone adhesive, this tape showcases its superior quality! The

WOD Tape Kapton Tape 0.38 in. x 36 yd. Amber Polyimide High Temperature, Pack of 96

Kapton Polyimide Film TapesProduct DescriptionWOD PKT2 Kapton™ Polyimide Film Tape is a 2 mil electrical grade Kapton alternative POLYIMIDE film

WOD Kapton Tape 2 Mil, Silicone Adhesive - 36 yards, High Temp. Resistant for Masking and Soldering, No Residue, PKT2

High Quality Produce Bag Sealing TapeWOD UPVC-24BS High Quality Bag Sealing Tape is 2.4 mil (35-micron film); Is used to seal polyethylene and other

WOD UPVC-24BS Rainbow Produce Poly Bag Sealing Tape (Available in Multiple Colors): 1/2 in. x 180 yds. (Pack of 3)

WOD Electrical Tape is a 19mm wide Plasticized PVC film with an aggressive rubber-based adhesive in OSHA colors; rolls are individually cello-wrapped and labeled. It is a UL/CSA 1.5 in. listed core. Flame retardant and cold resistant! Whether you are re-wiring, installing, splicing your home electrics, working on electrical projects, or just choosing a creative, economical way to decorate your home, office, or car.

Wod El-766aw Professional Grade Electrical Tape General Purpose Black UL/CSA Listed Core: 1.5 inch x 66 ft - Use at No More Than 600V & 176F

【Kapton Tapes】 Made with DuPont HN Kapton films and high temperature silicone adhesive. 【High Temperature】 Able to withstand extreme temperatures ,

CGS, 2 Mil Dupont Kapton® Tape. High Temperature Heat Tape, UL 510 Flame Retardant, Clean Removal. 0.25 x 36 Yards

TapeCase 2 mil Polyimide Film Tape with Silicone Adhesive 2 x 1yd

Tape

Bertech Kapton Polyimide Low Static Adhesive Tape, 3 Core, 1 mil