Tekton PGF10008 Long Nose Pliers,8

4.8

(213)

Write Review

$ 11.50

Add to Cart

Qty

In stock

Description

Fine Tipped Jaws: Tapering to a fine tip just at the nose, the jaws are thick and wide at the base so they won't roll over each other or separate when you are aggressively pulling or twisting. Crosscut Teeth: Oriented at 120° to each other 60° to each side of the jaw centerline the serrations are cut in 2 passes to form regularly-spaced, diamond-shaped teeth.

Gripping and Cutting Pliers Set (7-Piece), TEKTON

Extra Long, Bent Nose: A smooth, 70-degree bend works around obstructions. Originating from a point more than halfway down the jaw, the bent section is exceptionally long, offering a generous reach into tight, narrow spaces. Crosscut Teeth: Oriented at 120 degrees to each other60 degrees to each side of the jaw centerlinethe serrations are cut in two passes to form regularly-spaced, diamond-shaped teeth.

Tekton PGF10406 6 in. 70-Degree Bent Long Nose Pliers

Long, Slender Nose: Relative to their overall length, these pliers have an extra long and slender nose that reaches deep into tight spaces and offers a deft grasp on small parts. Crosscut Teeth: Oriented at 120 degrees to each other60 degrees to each side of the jaw centerlinethe serrations are cut in two passes to form regularly-spaced, diamond-shaped teeth.

Tekton PGF10007 7 in. Long Nose Pliers

Clean Cut with Minimal Effort: Machining the blades to an optimized 90-degree angle allows them to be strong yet sharp, producing a satisfyingly smooth, clean cut that requires minimal effort. After the full pliers have been heat treated, a secondary induction-heating process hardens just the blades to 58-64 HRC, making them extremely durable and able to cut tougher materials.