This is an original HOSCO fret slot cutting saw. Blade length : 120 mm (4.72") Blade : carbon steel 4 different blade thicknesses : 0,5 mm; 0,53 mm; 0,57 mm; 0,6 mm Overall length : 325 mm (12.8") Teeth : 8/cm Teeth per inch : 20 Made in Japan.

This is an original HOSCO fret slot cutting saw.

Blade length : 120 mm (4.72)
Blade : carbon steel
4 different blade thicknesses : 0,50 mm;  0,53 mm;  0,57 mm;  0,60 mm
Overall length : 325 mm (12.8)
Teeth : 8/cm
Teeth per inch : 20

Made in Japan.

This is a BAKUMA KATABA 60 cm (23.6) Japanese single edged saw with a 265 mm (10.4) blade. 

This is a very sharp carpenter saw for deep cut.

Blade length : 265 mm (10.4)
Overall length : 600 mm (23.6)
Blade thickness : 0,6 mm
Cutting width : 0,9 mm (±0,05 mm)

The handle is made by wood, wrapped with rattan.

It comes with 3 spare blades, so 4 blades at all for many years of work.

(It is also quicker and cheaper than to resharp)

Made in Japan.

This is an original high quality Japanese Zsaw Zetsaw HI III 265 saw + 1 crosscut spare blade.

Blade length : 265 mm (10.4) 
Overall length : 600 mm (23.6)
Blade thickness : 0,6 mm
Width of cut : 0,92 mm
Pitch : 1,75 mm

Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade. 

Easy to use regardless of the cutting direction. Ideal for Cross, Rip and Slant cutting conventional sawn wood, plywood, laminated board

Excellent durability.

Wood handle wrapped with rattan.

Made in Japan.

This is an original high quality Japanese Zsaw Zetsaw HI III 265 spare blade.

Length : 265 mm (10.4) 
Blade thickness : 0,6 mm
Width of cut : 0,92 mm
Pitch : 1,75 mm
Weight : 70 grams

Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade.

Easy to use regardless of the cutting direction. Ideal for Cross, Rip and Slant cutting conventional sawn wood, plywood, laminated board

Excellent durability.

Made in Japan.

This is an original high quality Japanese Zsaw Zetsaw HI 265 spare blade.

Length : 265 mm (10.4) 
Blade thickness : 0,6 mm
Width of cut : 0,92 mm
Pitch : 1,75 mm
Weight : 75 grams

Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade.

Ideal for cross cutting conventional sawn wood, plywood, laminated board.

Excellent durability.

Made in Japan.

This is an original high quality Japanese Zsaw Zetsaw HI 265 saw + 1 crosscut spare blade.

Blade length : 265 mm (10.4) 
Overall length : 600 mm (23.6)
Blade thickness : 0,6 mm
Width of cut : 0,92 mm
Pitch : 1,75 mm

Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade. 

Ideal for cross cutting conventional sawn wood, plywood, laminated board.

Excellent durability.

Wood handle wrapped with rattan.

Made in Japan.

High quality japanese kataba Zsaw Zetsaw ALPHA 265 + 1 spare blade

Blade length : 265 mm (10.4)
Overall length : 600 mm
Bladethickness : 0,6 mm 
Width of cut : 0,88 mm
Pitch : 1,75 mm
Weight : 160 grams

Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade. 
Convex curved blade can cut wood deeply without slipping in the kerf, and easily achieve a straight bottom line of various half-lap joints of leather softwood or hardwood. 

Ideal for cross cutting conventional sawn wood, plywood, laminated board.

Excellent durability.

Wood handle wrapped with rattan.

Made in Japan

This is an original high quality Japanese Zsaw Zetsaw ALPHA 265 spare blade.

Length : 265 mm (10.4)
Blade thickness : 0,6 mm 
Width of cut : 0,88 mm
Pitch : 1,75 mm
Weight : 70 grams

Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade. 
Convex rounded blade can cut wood deeply without slipping in the kerf, and easily achieve a straight bottom line of various half-lap joints of leather softwood or hardwood. 

Ideal for cross cutting conventional sawn wood, plywood, laminated board.

Excellent durability.

Made in Japan

High quality Japanese kataba Zsaw Zetsaw HI 300 rip cut spare blade.

Blade length : 300 mm (11.8)
Blade thickness : 0,66 mm 
Width of cut : 0,93 mm
Weight : 100 grams

The teeth are smaller close to the handle and getting bigger at the end of the blade, for an easier start. 

Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade. 
Ideal for rip cut of conventional sawn wood, plywood, laminated board.

Excellent durability.

Made in Japan.

This is an original Xbeam high quality Japanese 300 mm kataba spare blade.

Length : 300 mm (11.8) 
Blade thickness : 0.7 mm
Width of cut : 1,1 mm
Pitch : 1,15 mm
Weight : 110 grams

Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade.

Ideal for cross cutting conventional sawn wood, plywood, laminated board.

Excellent durability.

Made in Japan.

High quality japanese kataba S450 Razorsaw Gyokucho spare blade.

Blade length : 270 mm (10.6)
Blade thickness : 0,6 mm 
Kerf : 0,93 mm
Pitch : 1,7 mm
Weight : 90 grams

Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade. 
Ideal for cross cutting conventional sawn wood, plywood, laminated board.

Excellent durability.

Made in Japan.

High quality japanese kataba Razorsaw Gyokucho 453 + 1 spare blade S-450 S450.

Blade length : 270 mm (10.6)
Overall length : 600 mm (23.6)
Blade thickness : 0,6 mm 
Kerf : 0,93 mm
Pitch : 1,7 mm
Weight : 240 grams

Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade. 
Ideal for cross cutting conventional sawn wood, plywood, laminated board.

Excellent durability.

EVA grip handle.

Made in Japan.

This is an original BAKUMA KATABA 60cm (23.6) Japanese single edged crosscut saw 

Blade length : 265 mm (10.4)
Overall length : 600 mm (23.6)
Blade thickness : 0,6 mm
Cutting width : 0,9 mm (±0,05 mm)

This is a very sharp carpenter saw for deep cross cut.

The handle is made by wood, wrapped with rattan.

Made in Japan

H-FSWG : Fret Saw Guide

Hosco Tool Catalog - 2020 2021, PDF, Knife

Japanese saw and spare blade, Japan hand tools saw

Hosco TL-FC190 Fret Cutter : Musical Instruments

Japanese Fret Saw - StewMac

Fret Slot Cutting Saw HOSCO TL-H-FSW Japan instrument luthier

Japanese Fret Saw - StewMac

Luthier Tools and Supplies, Guitar parts

High Grade Fret Slot Cutting Saw (0.50mm) — Cascadia Lutherie

Traditional Japanese saw for cutting fret slots. This has a tooth spacing of 1,25mm to accurately cut fret sloths of 0,6mm width through even the

Fret saw 0,6mm

Knew Concepts 5 Titanium Birdcage Fret Jewelers Saw With 12, 53% OFF

Japanese Fret Saw - StewMac

Fret slot cleaning saw 0,5mm

H-FSWG : Fret Saw Guide

Fret Saw In Guitar Building & Luthier Supplies for sale