System Three G-2 Epoxy Glue Kit, 12 oz.

For over 35 years, G-2 has been an excellent epoxy adhesive choice for oily, acidic hardwoods like teak and other tropical woods. Use it for gluing oak and cedar, as well as other materials that are difficult to bond. G-2 was developed primarily for waterproof bonding of rot-resistant woods used in fine yacht joinery. Use G-2 for both interior and exterior applications as well as below the waterline. G-2 can be mixed in small or large batches, has a long pot life and cures overnight.

Loctite EA 1C Off-white 2-Part Epoxy Adhesive 4oz Kit

G2 Epoxy - Lee Valley Tools

Epoxy Laminating Resin 2:1- 1.5 Quart Kit- Medium Speed

System Three General Purpose Epoxy Resin - Quart

Gorilla Epoxy Glue Syringe Super Strong Bond Sets in 5 Minutes Gap Filling Outdoor Water Resistant 0.85 oz Clear, 2-Pack

Color your epoxy for resins, filler and much more! Simply add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use - only add hardener when you are ready to use.

System Three 3202A04 Brown Paste Pigment Coating, 2 oz. Bottle

West System G/ Flex Epoxy Repair Kit 2 Part Adhesive - 4Corners

SET3G56 High-Strength Epoxy Adhesive

Henkel Loctite EA 934NA High-Temp Epoxy Adhesive Kit

General Purpose Resin is a versatile, all-around epoxy resin system used in both marine and woodworking applications. Three different hardeners offer

General Purpose Epoxy

Epoxy Resin Crystal Clear 2 Part Kit for Super Gloss Finish

T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modifications in normally fitted joints, and will cure in any thickness without shrinkage. T-88 is clear amber and becomes virtually invisible when varnished. T-88 exhibits outstanding adhesion and permanence on a wide variety of materials, and is endorsed by leading designers, builders and organizations.

System Three 1100K10 Amber T-88 Kit 0.5 Pint Bottle

System Three Quick Cure 15 Epoxy sets in 15 minutes. This makes it perfect for those wanting a faster set time for larger projects or just needing extra time for multiple glue-ups, fitting and clamping. Two-bottle kit (hardener and resin) with an easy 1-to-1 mixing ratio makes it hard to mess up. Be advised heat or lack of can affect cure time, but quality ingredients enable it to come pretty close to 15 minutes, so there arent any surprises when using it.

System Three 1010K10 Quick Cure 15, Kit, 1/2 Pint, Amber