Steel Bench Block

Hardened steel block measures 5 3/4 x 4 x 7/16 thick and is used for general hammering. Ground flat and smooth. All horizontal edges are sharp. An

Comes with a steel bench block, a nylon bench block, and a rubber base that can house either of them. Steel and nylon blocks measure 3” (7.6 cm) in diameter and 0.75” (1.9 cm) thick. Rubber base measures 4” (10 cm) in diameter and 1.25” (3.2 cm) thick and snuggly houses either block. Overall weighs 2 lb 2 oz (963 g). This bench block set comes with a steel bench block, a nylon bench block, and a rubber base that can house either of them.

Steel Bench Block - with Nylon Block and Rubber Base - SFC Tools - 12-500

8"x 8"x2" Steel Bench Block - Thunderbird Supply

Steel Bench Block 2x2x0.375 with Rubber Feet - Quality Gold

This bench block is made of polished, hardened steel with a hardwood backing. Ideal for flattening wire or chasing, but it also works well for hardening soft wire or metal. Simply place the wire or metal onto the correct surface (softer wire onto the wooden side and harder wire onto the metal side of the block) and whack it with an appropriate hammer (to correlate with the metal malleability).

Dual Utility Anvil 3x3 Inches Steel Block w/ Wood Base (1 Piece)

HimaPro Steel Bench Block 4x4 Flat Anvil Jewelers Tool Metal

Description:, Steel bench block for jewelry stamping., The stamping block: hardened, all surfaces smoothly polished, and chamfered to avoid sharp

Steel Bench Block Durable Flat Jewelry Making Tool for Jewelry Making and Metal Stamping Metal Smithing Shaping Stamping

Steel and rubber bench block – The Makery

Steel Bench Block is a 4x 6 rectangular, a basic tool used on the bench. 🟢 This flat block is hardened and is smooth on all sides and surfaces.

Steel Bench Block 6 x 4 x 10mm Hardened Steel Smooth Flat Jewelry Work Anvil

Rio Grande Rubber and Steel Combination Bench Block 2.5 x 2.5

This two sided jewelers bench block is great for jewelry repair, pounding, stamping and dapping. This is a great workbench accessory because it has a steel block for pounding and a rubber block for delicate jewelry repair and shock absorbing. It is a handy tool for watchmakers, silversmiths, beaders, and wire workers. Hard vulcanized rubber is excellent when a softer surface is needed. Flip it over to reveal the hardened steel block for flattening, chasing, and stamping.

Bench Block, Steel and Rubber, 2-1/2 Inches DAP-520.00

Durston Steel Bench Block 65mm (2-1/2) Flat Square

Steel Bench Block Flat Anvil with Rubber Base Jewelers Tool 2.5 x

If you love wire and metal work you will need a sturdy steel bench block. This heavy little block won't go anywhere as you work to texture, flatten,

The BeadSmith Steel Bench Block

Steel bench block. This simple tool has several uses. As a base for wire forging. As a base for jewelry stamping.Anytime you need a hard durable work

Steel block, 2.5 x 2.5 x 3/4 inch, bench block, hand stamping, wire forging, metal texturing base