Smooth-On Mold Star 16 FAST - Platinum Cure Molding Silicone - Stage and Screen FX

Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star 16 FAST is a faster material with a 6 minute pot life and 30 minute cure time. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450 F (232 C) and is suitable for casting low-temperature melt metal alloys. Each kit contains 1 pint of part A and 1 pint of part B Note: THI-VEX is NOT compatible with Mold Star

Smooth-On Mold Star 16

Smooth-On Range Glassfibre and Resin Supplies Ltd

Mold Star 15 Slow - 1A:1B Mix by Volume Platinum Silicone Rubber - Pint Unit

Ecoflex 00-30 - Super-Soft, Addition Cure Silicone Rubber - Pint Unit

Smooth Cast 65D - Semi-Rigid Urethane Casting Resin - Pint Unit

Mold Star 16 Fast - 1A:1B Mix by Volume Platinum Silicone Rubber - Gallon Unit

The Smooth Cast 300 Series of liquid plastics are ultra-low viscosity casting resins that yield castings that are bright white and virtually bubble free. Vacuum degassing is not necessary. They offer the convenience of a one to one mix ratio (one part A to one part B by volume). Fully cured castings are tough, durable, machinable and paintable. They resist moisture and mild solvents.

Smooth-On - Smooth Cast 300 Liquid Plastic Compound

Mold Star™ rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star™ silicones feature

Smooth-On Mold Star 16 FAST, Trial Set

Mold Star 15 Slow - 1A:1B Mix by Volume Platinum Silicone Rubber - Pint Unit

Dragon Skin FX-Pro is a soft, stable, high performance platinum silicone rubber specifically designed for creating silicone makeup appliances and skin effects. Dragon Skin FX-Pro is compatible with Skin-Tite silicone adhesive as well as medical grade pressure sensitive adhesives for adhering silicone appliances temporarily to the skin. Soft and stretchy FX-Pro has a Shore hardness of 2A.

Smooth-on Dragon Skin FX-Pro Silicone Rubber, Trial Size, 2 Lbs