NOTE: We strongly recommend replacing the factory bottom particle board cover with a heavier material for attaching these feet. Mnpctech Thorens turntable feet do not replicate your vintage or new turntable manufacturer feet. These are a custom made substitute. They measure 1" diameter (25,4mm) x 5/8" tall (15,88mm) F
Turntable FEET BY Mnpctech
NOTE: We strongly recommend replacing the factory bottom particle board cover with a heavier material for attaching these feet. Mnpctech Thorens
THORENS Large Turntable Isolation Feet (Four)
Mnpctech Legacy Turntable Isolation Feet (Four)
Turntable FEET BY Mnpctech
Monoprice Monolith Turntable Height Adjustable Turntable Isolation Fee – Mnpctech
THORENS Small Turntable Isolation Feet (Four) – Mnpctech
Set of FOUR feet. M6 Thread screws pre-installed. Each foot measures 35mm (1.37) tall x 45mm (1.77) wide, which may be smaller than your factory
Mnpctech
THORENS Large Turntable Isolation Feet (Four) – Mnpctech
NOTE: We strongly recommend replacing the factory bottom particle board cover with a heavier material for attaching these feet. Mnpctech Thorens
THORENS Small Turntable Isolation Feet (Four)
1.75 Adjustable Height Leveling Turntable Isolation Feet – Mnpctech