Magnetic Flex Plate Double-Sided and Single-Sided with 3M Magnetic Backing (Energetic & West3D Collab)

West3D and Energetic Collab design - Double-sided PEI spring steel sheet (options for textured (powder coated) and smooth, or double sided smooth). Our flex steel sheets are .5mm thick without the PEI coating, and approximately 1mm thick with both PEI sides.  Disclaimer: The smooth side has a protective film to prevent damage during shipment. Please remove this film before use. This flex plate is oversized to make removing and fitting to the build plate easy, and features options for either plain or logo'd on the smooth side. For double-sided smooth flex plates “Yes Logo” means we put the logo on one side and not on the other. For Voron Sizes: For 350mm builds order a 355mm For 300mm builds order a 305mm For 250mm builds order a 255mm For V0.1 builds order a 125mm For other printers please review the sizing
West3D and Energetic Collab design - Double-sided PEI spring steel sheet (options for textured (powder coated) and smooth, or double sided smooth). Our flex steel sheets are .5mm thick without the PEI coating, and approximately 1mm thick with both PEI sides.  Disclaimer: The smooth side has a protective film to prevent damage during shipment. Please remove this film before use. This flex plate is oversized to make removing and fitting to the build plate easy, and features options for either plain or logo'd on the smooth side. For double-sided smooth flex plates “Yes Logo” means we put the logo on one side and not on the other. For Voron Sizes: For 350mm builds order a 355mm For 300mm builds order a 305mm For 250mm builds order a 255mm For V0.1 builds order a 125mm For other printers please review the sizing required for your particular model. Popular Models: 320x310mm - CR10s Pro(v2)/CR10V2/V3 Ender 3 Max 254x241mm - Prusa MK3(s) / MK2.5 235x235mm - Ender 3 (3,3X,Pro etc.), Ender 5, Cr-20, CR-20 Pro, Geetech A10 etc. 196.3x190mm - Prusa Mini 180x180mm - RatRig V-Minion 160x160mm - SaladFork We have our very own PNG for our logo build plates for use in your favorite slicer, thanks Kyleisah#2433! 355/305/255mm 125mm *PLEASE NOTE: This product is not affiliated or endorsed by Voron Design.
West3D believes in community, and that by working with our community we can sustainably promote 3D Printing to the next generation of makers that will take this industry to new heights. West3D supports community through direct engagement with hobbyists and makers, and by sourcing and supplying quality 3D Printer supplies at reasonable prices. We help you turn your ideas into reality. Consider joining us.
West3D and Energetic Collab design - Double-sided PEI spring steel sheet (options for textured (powder coated) and smooth, or double sided smooth). Our flex steel sheets are .5mm thick without the PEI coating, and approximately 1mm thick with both PEI sides.  Disclaimer: The smooth side has a protective film to prevent damage during shipment. Please remove this film before use. This flex plate is oversized to make removing and fitting to the build plate easy, and features options for either plain or logo'd on the smooth side. For double-sided smooth flex plates “Yes Logo” means we put the logo on one side and not on the other. For Voron Sizes: For 350mm builds order a 355mm For 300mm builds order a 305mm For 250mm builds order a 255mm For V0.1 builds order a 125mm For other printers please review the sizing required for your particular model. Popular Models: 320x310mm - CR10s Pro(v2)/CR10V2/V3 Ender 3 Max 254x241mm - Prusa MK3(s) / MK2.5 235x235mm - Ender 3 (3,3X,Pro etc.), Ender 5, Cr-20, CR-20 Pro, Geetech A10 etc. 196.3x190mm - Prusa Mini 180x180mm - RatRig V-Minion 160x160mm - SaladFork We have our very own PNG for our logo build plates for use in your favorite slicer, thanks Kyleisah#2433! 355/305/255mm 125mm *PLEASE NOTE: This product is not affiliated or endorsed by Voron Design.

West3D's own spring steel black PEI sheet (option for single/double sided) with 3M magnetic Base and adhesive backing (468MP 200MP Adhesive). Magnet

West3D's High Performance Black PEI Bed Flex Plates with High-Temp Magnetic Backing

Completely Assembled 3D printer Belt Tension Meter - by PF Makes - Special West3D Edition, West3D 3D Printing Supplies

Featured - West3D Printing

Wire Din Rail Terminal Block x1 Wire Cable Connectors UK2.5 B

This sheet is designed specifically to stick really well to filaments like Polycarbonate that like to warp. This is a first batch plate, please let us

Super Stick Double-Sided Flex Plate for High Warp Filaments

West3D Voron V2.4 Self-Source Configurator

Voron 2.4 Build MIC6 Aluminum Build Plate

These high quality magnet sheets have a strong magnetic force and can operate at high temperatures which makes them perfect for 3D printer flex

High Temp Magnet Sheet - GraviFlex® 200 - Schallenkammer strong hold Magnetic Base with adhesive for Flex Plates

Magnetic Flex Plate Double-Sided and Single-Sided with 3M Magnetic Backing ( Energetic & West3D Collab)

Fan Failure Detection Board, This board is able to detect a stalled fan and set an output to trigger external actions., Overview, This board uses the

Fan Failure Detection Board by Tim Abraham (timmit99)

West3D and Energetic Collab design - Double-sided PEI spring steel sheet (options for textured (powder coated) and smooth, or double sided smooth).

Magnetic Flex Plate Double-Sided and Single-Sided (Energetic & West3D Collab)

West3D's own double sided sprint steel sheet with Carbon Fiber texture and Black smooth PEI with 3M magnetic Base and adhesive backing (468MP 200MP

Carbon-Fiber / Black PEI Performance Double Sided Flex Plates with High-Temp Magnetic Backing

Magnetic Base with adhesive for Flex Plates