Retractable Tool Lanyard with Carabiner Mount

Lightweight and extremely durable tethering solution designed to mount to a D-ring user’s belt or a separate anchor point. Using a retractable lanyard limits potential snag hazards compared to standard lanyards. This lanyard can tether hand tools weighing up to 8lbs / 3.6 kg to prevent falling objects when working at-heights.

The Squids 3011 Retractable Tool Lanyard is a lightweight and extremely durable tethering solution designed to mount to a D-ring user’s belt or a separate anchor point. Using a retractable lanyard limits potential snag hazards compared to standard lanyards. This lanyard can tether tools weighing 0.5lbs / 0.23kg in a retracted state and prevents tools weighing 8lbs / 3.6 kg from falling on people or objects below when working at-heights.</p>

The retractable tethering cord is made of high-strength, cut-resistant Dyneema with a protective sleeve over the exposed cord to reduce wear and tear for a longer life. The durable ABS plastic housing is textured for better grip and is designed to protect the internal workings of the retractable. Featuring a tapered cord exit to limit the debris being retracted back into the housing with the cord. Even with its incredible durability this heavy-duty retractable lanyard weighs less than 0.5lb / 0.23kg and measures 48in / 122cm when fully extended.</p>

HOW TO USE</h3>

The anchoring end of the retractable features a swiveling carabiner connection for anchoring to d-rings or other locations. The connecting end of the cord has a Squids double-action carabiner to secure to a hand tool weighing up to 8lbs / 3.6 kg.</p>

A trigger switch allows you to set your working length and keep the lanyard at a fixed length, so you don’t feel a constant tension on your tool while getting the job done. To lock the cord in place, simply flip the trigger switch at the desired cord length. To retract, either flip the switch back or pull the lanyard out a bit further to release the lock allowing the cord to retract again.</p>

TESTED TO BE TRUSTED</h3>

Tested and complies with the ANSI/ISEA 121-2018 standard, these retractable tool lanyards have no equal. The tethering cord is designed to expose a red length of cord that serves as an impact indicator if the lanyard sees a force of 110lbs / 50 kg or greater, letting you know if a drop has occurred.</p>

All tool lanyards are built to withstand defined weight limits and are easy to use by any worker to avoid accidentally dropped objects that could cause unwanted damage, injuries, or possibly death. Safety lanyards are a part of an overall fall protection plan to reduce the risk of falling objects and increase workplace safety. When working at-heights it’s critical to tether tools.</p>

Create a Drops Free Zone™ with SQUIDS™ retractable tool lanyards

Ergodyne Squids 3003 Retractable Tool Lanyard with Two

Squids 3156 Coil Tool Lanyard with Single Carabiner - 2lbs / 0.9kg - 6 / Carton - 2 lb Load Capacity - Carabiner Attachment - 1.5 Height x 4 Width x 48 Length - Black - Aluminum, Plastic - Kopy Kat Office

Squids Ergodyne 3000 Retractable Dual Ss Carabiner- 1lb, Black

Ergodyne Squids® 3011 Retractable Tool Lanyard with Carabiner Mount - 8lbs / 3.6kg, Black, Standard

Ergodyne Squids 3100 Single Carabiner Tool Lanyard - 10lbs, Black, Extended

Ergodyne Squids Series 19301 Retractable Tool Lanyard, Standard

Ergodyne Squids 3010 Retractable 5 lb Tool Lanyard with Belt Loop Clip

The Squids 3011 Retractable Tool Lanyard is a lightweight and extremely durable tethering solution designed to mount to a D-ring user's belt or a separate anchor point. Using a retractable lanyard limits potential snag hazards compared to standard lanyards. This lanyard can tether tools weighing 0.5 lbs. /0.23 kg in a retracted state and prevents tools weighing 8 lbs. /3.6 kg from falling on people or objects below when working at-heights.

Ergodyne Squids 3011 Retractable Lanyard with Carabiner Mount, Black

Squids® 3010 Retractable Tool Lanyard with Belt Loop Clip

The Squids 3002 Retractable Tool Lanyard features a hook and loop belt/harness attachment on one end, and an auto-locking carabiner connection on the other end. This retractable lanyard is designed to tether hand tools weighing up to 0.5lbs/0.23kg in a retracted state and prevents tools weighing up to 2lbs/0.9kg from becoming falling objects. When attached to a belt or harness, the low-profile design keeps the lanyard out of the user's way while working at heights.

Squids 3002 Standard Gray Retractable Tool Lanyard

Retractable Tool Lanyard Dual Carabiner, Stainless Steel

Retractable Tool Lanyard Single Carabiner with Loop End