Rapid Tac 2 Metro Restyling

4.7

(540)

Write Review

$ 3.99

Add to Cart

Qty

In stock

Description

Rapid Tac II Application Fluid For fast, easy, quality installation of vinyl graphics with no bubbles. Rapid Tac II recommended for cold weather. Rapid Tac 2 was designed for "premium Cast" films in most weather/temperature conditions. Now there is Rapid Tac II which works with any type of film in temperatures extremes 20°F to 140°F. and is a blessing for glass applications. Change is good. Back in the day choosing a vinyl film was easy with basically two film types, cast, and calendared. Nowadays things are a little different. Sign and graphics professionals now have more types of vinyl films to choose from than ever, with more adhesive types as well. Rapid Tac II was developed to work with a wider variety of films such as the economy calendared, intermediate calendared, high performance calendared, metallic, reflective, polyester, mylar, and other
Rapid Tac II Application Fluid For fast, easy, quality installation of vinyl graphics with no bubbles. Rapid Tac II recommended for cold weather. Rapid Tac 2 was designed for premium Cast films in most weather/temperature conditions. Now there is Rapid Tac II which works with any type of film in temperatures extremes 20°F to 140°F. and is a blessing for glass applications. Change is good. Back in the day choosing a vinyl film was easy with basically two film types, cast, and calendared. Nowadays things are a little different. Sign and graphics professionals now have more types of vinyl films to choose from than ever, with more adhesive types as well. Rapid Tac II was developed to work with a wider variety of films such as the economy calendared, intermediate calendared, high performance calendared, metallic, reflective, polyester, mylar, and other specialty films). Rapid Tac II promotes bonding faster than the original Rapid Tac application fluid and is ideal for cold weather and glass application. Rapid Tac II is not a replacement for the Original Rapid Tac and may bond too fast with “Premium Cast” films in warmer conditions. How to use: Clean surface thoroughly with Rapid Tac II and a kitchen paper towel. DO NOT USE OTHER CLEANERS OR SOLVENTS. (We do recommend Rapid Prep as a pre-cleaner for surfaces that may have been exposed to wax, silicone, or other suspected contaminants) Spray surface again with Rapid Tac, peel backing off the decal, and place on a wet surface. Position decal and spray top of the decal to minimize scratching. Use a squeegee to remove fluid, using a good deal of pressure and working from the center out to the edges in all directions. Wait 2-3 minutes. Saturate paper cover tape, if any, with Rapid Tac, then remove the paper tape. Wipe the surface with a paper towel.