STRONN Polyurethane Heat Activated Adhesive Glue Automotive

8OZ  STRONN Heat Activated Adhesive For Automotive Upholstery and Shoe Sole Glue  FOR INDUSTRIAL OR PROFESSIONAL USE ONLY. One-component polyurethane adhesive is designed for shoe production (gluing soles from TEP, PVC, polyurethane, tunit, genuine leather, rubber, etc.). Fast to glue and resistant to high temperatures

8OZ  STRONN Heat Activated Adhesive For Automotive Upholstery and Shoe Sole Glue 

FOR INDUSTRIAL OR PROFESSIONAL USE ONLY.

One-component polyurethane adhesive is designed for shoe production (gluing soles from TEP, PVC, polyurethane, tunit, genuine leather, rubber, etc.). Fast to glue and resistant to high temperatures.

And for automotive upholstery

Made in USA

How to use: It is used at a temperature not lower than 18°C. Clean both surfaces and apply on each 1-2 layers of glue and allow to dry for 15-20 minutes. Then the surfaces are heated with a dryer at a temperature of 130F and immediately very tightly press for 3-5 seconds. Final adhesion is achieved after 24 hours.

Add 3-5% of hardener improves the adhesion of all and especially difficult to adhere materials (SBR rubber, TEP, PU, PVC, ABS, greased leathers).

DANGER! HIGHLY FLAMMABLE LIQUID AND VAPOR, CAUSES SERIOUS EYE IRRITATION, CAUSES SKIN IRRITATION, MAY

CAUSE AN ALLERGIC SKIN REACTION, MAY CAUSE DROWSINESS OR DIZZINESS. MAY DAMAGE FERTILITY OR THE UNBORN CHILD, CAUSES DAMAGE TO NERVOUS SYSTEM AND SENSORY ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

8OZ  STRONN Heat Activated Adhesive For Automotive Upholstery and Shoe Sole Glue  FOR INDUSTRIAL OR PROFESSIONAL USE ONLY. One-component polyurethane adhesive is designed for shoe production (gluing soles from TEP, PVC, polyurethane, tunit, genuine leather, rubber, etc.). Fast to glue and resistant to high temperatures. And for automotive upholstery Made in USA How to use: It is used at a temperature not lower than 18°C. Clean both surfaces and apply on each 1-2 layers of glue and allow to dry for 15-20 minutes. Then the surfaces are heated with a dryer at a temperature of 130F and immediately very tightly press for 3-5 seconds. Final adhesion is achieved after 24 hours. Add 3-5% of hardener improves the adhesion of all and especially difficult to adhere materials (SBR rubber, TEP, PU, PVC, ABS, greased leathers). DANGER! HIGHLY FLAMMABLE LIQUID AND VAPOR, CAUSES SERIOUS EYE IRRITATION, CAUSES SKIN IRRITATION, MAY CAUSE AN ALLERGIC SKIN REACTION, MAY CAUSE DROWSINESS OR DIZZINESS. MAY DAMAGE FERTILITY OR THE UNBORN CHILD, CAUSES DAMAGE TO NERVOUS SYSTEM AND SENSORY ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

LOCTITE Extreme 1.62-fl oz Liquid All Purpose, Quick Dry, Flexible Multipurpose Adhesive in the Multipurpose Adhesive department at

Alcantara Hat

Textiles - PUR hot melt adhesives

3M™ Polyurethane Adhesive Sealant 560

Heat Adhesive Tape

16oz Polyurethane Heat Activated Adhesive Glue Contact Cement for Automotive Upholstery & Shoe Sole STRONN SAR 306: : Industrial & Scientific

3M™ Nitrile High Performance Plastic Adhesive 1099, Tan, 5 Gallon Pail - The Binding Source

AAT-101 Aerosol Spray Adhesive is a high performance, waterproof, web adhesive used for both temporary and permanent bonding. Its quick, initial tack and high solids make it perfect for cardboard, foam, plastics, cloth, polyethylene sheeting, carpet padding and carpet. It is non-staining which makes it suitable for bonding carpet backings, fabrics and upholstery.

Advanced Adhesive Technologies 101-12FL12 Aerosol Spray Adhesive 12fl oz

Tensor P307 Low-Odor California Compliant Spray Adhesive - Chemical Concepts

Glue Angel Glue Genius Super Glue and Activator Kit 8.45-fl oz Liquid All Purpose, Quick Dry, Flexible Multipurpose Adhesive in the Multipurpose Adhesive department at