Perma-Chink E-Wood Epoxy Wood Filler

4.5

(374)

Write Review

$ 36.00

Add to Cart

Qty

In stock

Description

Perma-Chink E-Wood Epoxy Wood Filler. Two-Part Putty Used to Fill Wood Voids. Wood-Toned, Easily Restores Missing Wood Sections, Can Be Stained To Blend In.
Perma Chink E-Wood Putty - For filling voids in decayed wood, E-Wood is the perfect product to use. E-Wood is a two component epoxy wood putty that may be used to fill in wood voids. It can be textured to match the appearance of the surrounding wood. Hardened E-Wood filler can be sanded, shaped and stained. E-Wood is a putty-like, non-shrinking, epoxy filler used to fill in missing sections of logs or dimensional wood members. E-Wood will form a permanent bond to most rigid surfaces. Porous surfaces should always be treated with a compatible, low viscosity epoxy system such as M-Balm. Use E-Wood to replace missing sections of window sills, frames, furniture, or any wood structure. Use it to add new sections to completed structures. After repair with E-Wood, restored wood can be shaped with your normal wood working tools, including saws, sanders, planes, routers and drills. Perma Chink E-Wood Features & Benefits: • Restores strength to deteriorated wood. • Does not shrink. • Can be sawed, drilled, routed, nailed, screwed, painted and stained. • E-Wood will form a permanent bond to most rigid surfaces. • Two component wood tone epoxy putty. • May be shaped, molded and textured to match the surrounding wood. • Soft or decayed wood should be consolidated with M-Balm first. • Hardens within 24 hours. Perma Chink E-Wood Special Note: • Porous surfaces should first be coated with M-Balm. • Use E-Wood to replace missing sections of windowsills, frames, furniture, or any wood structure. • Use it to add new sections to already completed structures. Perma Chink E-Wood Resources: SDS Sheet - E-Wood Part A SDS Sheet - E-Wood Part B Perma-Chink E-Wood Putty Package Contents: 32 Oz. Box: • (1) 16 Oz. Bottle Epoxy (Part A) • (1) 16 Oz. Bottle Hardener (Part B) 2 Gallon Kit: • (1) 1 Gallon Jug Epoxy (Part A) • (1) 1 Gallon Jug Hardener (Part B) Perma Chink E-Wood Application Methods & Rates: • Press into voids using gloved hands. • Putty knife or trowel. • 1.8 cubic inches per ounce mixed A&B components. Perma Chink E-Wood Application Information & Technique: • Application temperature is between 40° F to 90° F. • Apply E-Wood on clean and dry surface that was restored with M-Balm. • With disposable gloves on both hands, knead together one part of E-Wood Epoxy (Part A) with one part E-Wood Hardener (Part B) by volume. Mix no more than can be applied within 15 minutes. • Apply over wood that has been treated and sealed with M-Balm. Mold to a rough finished shape. • When cured, E-Wood can be sawed, nailed, carved, machined and sanded. E-Wood can tinted or painted. Perma Chink E-Wood Clean Up & Drying Time: • Uncured mixed E-Wood (Part A and Part B) may be cleaned up with white vinegar then flushed with water. • E-Wood hardens in 12 to 24 hours depending on temperature. • E-Wood cures slower in low temperatures. (Never change mixing ratio to compensate for temperature.) Perma Chink E-Wood Shelf Life: • E-Wood has a shelf life of 1 year. • Do not freeze! Perma Chink E-Wood Safety Precautions: • Always wear protective disposable gloves when using this product. • Avoid skin contact. • Skin sensitization may result from prolonged and repeated contact. • If use causes soreness, redness, blistering, or other symptoms of irritation, stop use and see a physician immediately. • Use with adequate ventilation. • If eye contact occurs, flush with large quantities of water and contact a physician immediately. • Do not use around open flame. • If Part A is swallowed, induce vomiting. • If Part B is swallowed, do not induce vomiting.