WOODEN ROD FOR PENDULUM 14 OR 35.5 CM LONG - ADCP

Original wooden rod for pendulum, the rod is unfinished. On one side of the rod is a threaded pin with a trumpet nut to secure a bob to the rod. The length of the wooden rod is approx. 14″ or 35,5 cm long, the metal thread is approx. 3" or 7,4 cm. Used item, signs of use. Stockphoto, item received may look slightly different.

Applied Sciences June-2 2023 - Browse Articles

Surface Layer: Most Up-to-Date Encyclopedia, News & Reviews

PENDULUM FOR WALL CLOCK GUSTAV BECKER WITH WILHELM TELL - ADCP

2017 URC ISE Abstracts by UNH URC ISE - Issuu

Clockwork taken from a German grandfather clock. Marked DUFA 2289. Length of suspension bridge 4 cm or 1 5/8 long. Each weight is approx. 3712 gram.

CLOCKWORK TAKEN FROM A GERMAN GRANDFATHER CLOCK MARKED DUFA - ADCP

WOODEN ROD FOR PENDULUM 13 1/4 OR 35 CM LONG

This part for grandfather clocks, and clocks with long wooden pendulum screws into the wooden rod to fasten the pendulum lens. Approx 5 or 13 cm

PENDULUM LOWER PART FOR WOODEN PENDULUM ROD TO FASTEN BOB - ADCP

Very rare and hard to find grandfather clock leader with adjustment of the pendulum for straight on the leader. Leader is approx. 7 1/4 or 18 cm

RARE HARD TO FIND GRANDFATHER CLOCK LEADER WITH PENDULUM ADJUSTMENT 7 1/4 OR 18 CM LONG - ADCP

Pendulum for a Warmink wall clock. Approx. 6 1/8 or 15,5 cm long.

WARMINK BRASS CLOCK PENDULUM 15,5 CM LONG - ADCP