ESSMO™ Neon Light Blue Glitter Sparkle Heat Transfer Vinyl HTV

Material Specification: PU Composition Thickness:230 Microns / 9.8 Mils (Please make sure plotter is capable of cutting such thickness) Heat pressure sensitive backing Glitter Finish Application Instruction (Home Iron) Set iron dial between Cotton and Linen Cover design with Kraft paper or non-stick cover sheet Place o

Material Specification:

• PU Composition
• Thickness:230 Microns / 9.8 Mils (Please make sure plotter is capable of cutting such thickness)
• Heat pressure sensitive backing
• Glitter Finish

Application Instruction (Home Iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Application Instructions (Heat Press)

• Cut in reverse
• Weed excess material
• Preheat all fabric prior to pressing for best results
• Apply design at 305°F/150°C-160°C for 12-15 seconds
• let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Applies to:

• 100% Cotton
• Poly / Cotton Blends
• 100% Polyester
• Leather

Laundering:

• Wait 24 hours before 1st wash
• Machine wash warm or cold / mild detergent (Max 60°C)
• Dry on normal dryer setting
• Do not bleach or dry clean

Note: Material will be rolled for shipment. Due to the nature of the material, wrinkles might appear after unroll. In this case, peel off the transfer tape (clear film) and re-apply transfer tape onto the film with heavy flat item on top such as yellow page for 15 minutes, the film will be back to the flat shape.

12” x 19.5”

Neon Blue Glitter HTV 12” x 19.5” Sheet - Heat Transfer Vinyl

ESSMO Light Blue Glitter Heat Transfer Vinyl HTV Sheet T-Shirt 20 Wide Iron On Heat Press 20x12

Material Specification: PU Composition Thickness:250 Microns / 9.8 Mils (Please make sure plotter is capable of cutting such thickness) Heat pressure

ESSMO™ Retro Neon Glitter Stripes Heat Transfer Vinyl HTV GS12

Glitter Heat Transfer Vinyl Iron On Vinyl Htv Vinyl For - Temu

Ultra Flex Glitter Neon Colors 20” wide Heat TRANSFER Vinyl for T-Shir – Aviva Wholesale

Material Specification: PU Composition Thickness:230 Microns / 9.8 Mils (Please make sure plotter is capable of cutting such thickness) Heat pressure

ESSMO™ Neon Orange Glitter Sparkle Heat Transfer Vinyl HTV DG27

ESSMO™ Reflective Heat Transfer Vinyl HTV T-shirt 20 Wide Roll Iron Heat Press

PERFECT FOR CRAFT CUTTERS - Actual product measures 11.8 x 1yd - 120 Microns thin. PU composition and CPSIA certified for children's clothing. SOFT

Siser Sparkle HTV 12x1yd Roll - Smooth Glitter Heat Transfer Vinyl (Blue Jean)

ESSMO Light Blue Glitter Heat Transfer Vinyl HTV Sheet T-Shirt 20 Wide Iron On Heat Press 20x12

GlitterFlex Ultra Neon opaque Baby Blue Glitter HTV –

HTVRONT 10 x 8FT Glitter Brown Heat Transfer Vinyl Iron on T-shirt HTV Vinyl for Cricut & All Cutter Machine