ESSMO™ Purple Glitter Sparkle Heat Transfer Vinyl HTV DG12 – EzAuto Wrap

ESSMO™ Purple Glitter Sparkle Heat Transfer Vinyl HTV DG12 – EzAuto Wrap

4.9
(118)
Write Review
More
$ 2.99
Add to Cart
In stock
Description

Material Specification: PU Composition Thickness:230 Microns / 9.8 Mils (Please make sure plotter is capable of cutting such thickness) Heat pressure sensitive backing Glitter Finish Application Instruction (Home Iron) Set iron dial between Cotton and Linen Cover design with Kraft paper or non-stick cover sheet Place o

Material Specification:

  • PU Composition
  • Thickness:230 Microns / 9.8 Mils (Please make sure plotter is capable of cutting such thickness)
  • Heat pressure sensitive backing
  • Glitter Finish

Application Instruction (Home Iron)

  • Set iron dial between Cotton and Linen
  • Cover design with Kraft paper or non-stick cover sheet
  • Place on flat, hard surface (ironing board not recommended)
  • Press iron with medium/firm pressure (do not slide iron)
  • Press each section of design for 10-15 seconds
  • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  • let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Application Instructions (Heat Press)

  • Cut in reverse
  • Weed excess material
  • Preheat all fabric prior to pressing for best results
  • Apply design at 305°F/150°C-160°C for 12-15 seconds
  • let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Applies to:

  • 100% Cotton
  • Poly / Cotton Blends
  • 100% Polyester
  • Leather

Laundering:

  • Wait 24 hours before 1st wash
  • Machine wash warm or cold / mild detergent (Max 60°C)
  • Dry on normal dryer setting
  • Do not bleach or dry clean

Note: Material will be rolled for shipment. Due to the nature of the material, wrinkles might appear after unroll. In this case, peel off the transfer tape (clear film) and re-apply transfer tape onto the film with heavy flat item on top such as yellow page for 15 minutes, the film will be back to the flat shape.

    ESSMO™ Black Glitter Sparkle Heat Transfer Vinyl HTV DG01 – EzAuto

    essmo™ – EzAuto Wrap

    Gloss Diamond Glitter Purple Vinyl Wrap – EzAuto Wrap

    Chrome Glitter Purple Vinyl Wrap – EzAuto Wrap

    Holographic Glitter Purple Rainbow Vinyl Wrap – EzAuto Wrap

    Siser Glitter HTV 20 x 12 Sheet - Iron on Heat

    Cat Eye Purple Vinyl Wrap – EzAuto Wrap

    ESSMO™ Rainbow White Glitter Sparkle Heat Transfer Vinyl HTV DG21

    Chrome Glitter Purple Vinyl Wrap – EzAuto Wrap

    ESSMO™ Gray Glitter Sparkle Heat Transfer Vinyl HTV DG20 – EzAuto Wrap

    Siser Glitter HTV 11.8x5ft Roll - Iron on Heat

    Chrome Glitter Purple Vinyl Wrap – EzAuto Wrap

    Material Specification: PU Composition Thickness:230 Microns / 9.8 Mils (Please make sure plotter is capable of cutting such thickness) Heat pressure

    ESSMO™ Neon Purple Glitter Sparkle Heat Transfer Vinyl HTV DG31

    Holographic Glitter Purple Rainbow Vinyl Wrap – EzAuto Wrap