shemitrans.com
Home
Search
HomeTire Foam10 Foam Filled No-Flat Wheel - Bare - MTM Hydro
10 Foam Filled No-Flat Wheel - Bare - MTM Hydro

10 Foam Filled No-Flat Wheel - Bare - MTM Hydro

5
(630)
Write Review
More
$ 20.50
Add to Cart
In stock
Description

Description MTM Hydro's Wheels can be found across the United States on any mobile pressure washer. These wheels come in various sizes and are offered in either Foam Filled (no-flat) or Pneumatic. Before shipping, all Pneumatic tires are checked for inflation PSI and will arrive as you ordered. We have set up several tires as stocked items with bearings or bushings already installed for your convenience. Specifications Foam Filled or Pneumatic Metal Ball Bearing or Nylon Bushing 5/8", 3/4", or Bare (no bearing/bushing) Measurements Axel Diameter – 1.5 inches Hub Length - 1 7/8 inches Wheel Diameter - 10 inches Tire Width - 3.5 inches   PROP 65 WARNING This product can expose you to chemicals, including Ethylene Glycol which is known to the state of California to cause cancer or birth defects, or other reproductive harm, go to www.p65Warnings.ca.gov for more

Description

Veloci Performance O-Rings will fit in any 1/4, 3/8, and 1/2 coupler in the U.S. Market. Veloci sells well over 100,000 o-rings per year because they are commonly lost at the worst of times. From amateurs to contract cleaners, everybody blows out o-rings, the difference is the pro's always have a few spare o-rings on hand.

Don’t get caught without a few extra o-rings on the job. A small investment makes a big difference in maintaining PSI, GPM, and safety.

Types of O-Rings

 

  • Buna Nitrile is a common and inexpensive compound used in o-rings found in all Veloci Performance brass couplers and should only be used in cold water applications (Maximum 250º F).
  • FKM (fluoroelastomer) is a more expensive and durable compound meant for Hot Water (Maximum 450º F) applications and performs well with chemical applications. Use the FKM o-rings for replacement on stainless steel fittings.
  • EDPM is a more expensive and durable compound that performs well with hot water but exceptionally with chemical applications. All Veloci Performance Stainless Steel Couplers have EDPM o-rings, although we do not sell replacements; instead, replace with FKM.

    •  

     




    Description

    Veloci Performance O-Rings will fit in any 1/4, 3/8, and 1/2 coupler in the U.S. Market. Veloci sells well over 100,000 o-rings per year because they are commonly lost at the worst of times. From amateurs to contract cleaners, everybody blows out o-rings, the difference is the pro's always have a few spare o-rings on hand.

    Don’t get caught without a few extra o-rings on the job. A small investment makes a big difference in maintaining PSI, GPM, and safety.

    Types of O-Rings

     

  • Buna Nitrile is a common and inexpensive compound used in o-rings found in all Veloci Performance brass couplers and should only be used in cold water applications (Maximum 250º F).
  • FKM (fluoroelastomer) is a more expensive and durable compound meant for Hot Water (Maximum 450º F) applications and performs well with chemical applications. Use the FKM o-rings for replacement on stainless steel fittings.
  • EDPM is a more expensive and durable compound that performs well with hot water but exceptionally with chemical applications. All Veloci Performance Stainless Steel Couplers have EDPM o-rings, although we do not sell replacements; instead, replace with FKM.

    •  


    Description

    Veloci Performance O-Rings will fit in any 1/4, 3/8, and 1/2 coupler in the U.S. Market. Veloci sells well over 100,000 o-rings per year because they are commonly lost at the worst of times. From amateurs to contract cleaners, everybody blows out o-rings, the difference is the pro's always have a few spare o-rings on hand.

    Don’t get caught without a few extra o-rings on the job. A small investment makes a big difference in maintaining PSI, GPM, and safety.

    Types of O-Rings

     

  • Buna Nitrile is a common and inexpensive compound used in o-rings found in all Veloci Performance brass couplers and should only be used in cold water applications (Maximum 250º F).
  • FKM (fluoroelastomer) is a more expensive and durable compound meant for Hot Water (Maximum 450º F) applications and performs well with chemical applications. Use the FKM o-rings for replacement on stainless steel fittings.
  • EDPM is a more expensive and durable compound that performs well with hot water but exceptionally with chemical applications. All Veloci Performance Stainless Steel Couplers have EDPM o-rings, although we do not sell replacements; instead, replace with FKM.

    •  



    Description

    Veloci Performance O-Rings will fit in any 1/4, 3/8, and 1/2 coupler in the U.S. Market. Veloci sells well over 100,000 o-rings per year because they are commonly lost at the worst of times. From amateurs to contract cleaners, everybody blows out o-rings, the difference is the pro's always have a few spare o-rings on hand.

    Don’t get caught without a few extra o-rings on the job. A small investment makes a big difference in maintaining PSI, GPM, and safety.

    Types of O-Rings

     

  • Buna Nitrile is a common and inexpensive compound used in o-rings found in all Veloci Performance brass couplers and should only be used in cold water applications (Maximum 250º F).
  • FKM (fluoroelastomer) is a more expensive and durable compound meant for Hot Water (Maximum 450º F) applications and performs well with chemical applications. Use the FKM o-rings for replacement on stainless steel fittings.
  • EDPM is a more expensive and durable compound that performs well with hot water but exceptionally with chemical applications. All Veloci Performance Stainless Steel Couplers have EDPM o-rings, although we do not sell replacements; instead, replace with FKM.

    •  



    Replacement seals for Garden Hose Couplers.
    Description

    Veloci Performance O-Rings will fit in any 1/4, 3/8, and 1/2 coupler in the U.S. Market. Veloci sells well over 100,000 o-rings per year because they are commonly lost at the worst of times. From amateurs to contract cleaners, everybody blows out o-rings, the difference is the pro's always have a few spare o-rings on hand.

    Don’t get caught without a few extra o-rings on the job. A small investment makes a big difference in maintaining PSI, GPM, and safety.

    Types of O-Rings
  • Buna Nitrile is a common and inexpensive compound used in o-rings found in all Veloci Performance brass couplers and should only be used in cold water applications (Maximum 250º F).
  • FKM (fluoroelastomer) is a more expensive and durable compound meant for Hot Water (Maximum 450º F) applications and performs well with chemical applications. Use the FKM o-rings for replacement on stainless steel fittings.
  • EDPM is a more expensive and durable compound that performs well with hot water but exceptionally with chemical applications. All Veloci Performance Stainless Steel Couplers have EDPM o-rings, although we do not sell replacements; instead, replace with FKM.

    • Veloci Performance Products - MTM Hydro 10 Foam Filled No-Flat

    This 3.00-4 (10x3, 260X85) foam-filled mobility tire features a bead width of approximately 2-5/8 and the Durotrap C9210 tread pattern. Tread code

    Monster Motion 3.00-4 (10x3, 260X85) Foam-Filled Mobility Tire with Durotrap Knobby Tread

    Rocky Mountain Goods Solid Rubber Hand Truck Wheel 10- 5/8” axle

    Magline 101020 10 Diameter Foam Filled Pneumatic Wheel with Semi

    Description MTM Hydro's Plated Steel Ball Valve replacement handle. Over time, parts wear out, including handles. Be sure to keep your ball valve

    Replacement Handle Plated Steel Ball Valve

    Veloci Replacement Pump Kit for GP Kit 113 MTM Hydro Parts

    AlveyTech 3.00-4 (10x3, 260X85) Foam-Filled Mobility

    10 Flat Free Hand Truck Tire and Wheel with 5/8

    Veloci Performance Products - MTM Hydro 3/4 Nylon Bushing for Wheels

    LINCO Flat Free Tire 10 - Heavy Duty Solid Rubber Wheel (300 LBS Cap)

    M407 Spray Gun - MTM Hydro

    10 Foam Filled No-Flat Wheel - Bare - MTM Hydro

    Description MTM Hydro's Inline Spray gun for professional Cleaners is ideal for Sewer Cleaning, Trenching, Potholing, and Hydro Excavation

    Inline Spray Gun

    Related products
    You may also like