Resin bond diamond polishing pads designed for granite, engineering stone, Dekton stone, marble and concrete counter tops. 7 polishing pad set includes #50, #100, #200, #400, #800, #1500, #3000 grit. Optimum RPM is 2,200 RPM and recommended maximum RPM is 4,500 RPM. 1.5mm segment height, use with air polisher or variable speed polisher either wet or dry.
Ceramic bonding grinding wheels for polishing concrete and smoothing scratch patterns, particularly around corners and edges. Ceramic bond grinding is very effective at removing scratch marks left by metal bond grinding wheels. #50 grit with 5/8-11 threaded arbor, use wet or dry.
EDiamondTools 5 in. Transitional Grinding Wheels for Concrete Polishing, #200 Grit, Ceramic Bond, 5/8 in.-11 Arbor
Dry Polishing Pads – SHDIATOOL
EDiamondTools 5 in. Electroplated Diamond Grinding and Polishing
EDiamondTools 5 in. Dry Diamond Polishing Pad Set for Stone and
Diamond Polishing Pads 5 Inch Wet Dry Set 8 Pieces for Marble
7 Packs Dry Diamond Polishing Pads 4 Inch with 5/8”-11 Rubber
Resin bond diamond polishing pads designed for granite, engineering stone, Dekton stone, marble and concrete counter tops. 7 pads set including #50-Grit, 100-Grit, 200-Grit, 400-Grit, 800-Grit, 1500-Grit, 3000-Grit. Optimum RPM is 2,200 RPM and recommended maximum is 4,500 RPM.
5 in. Dry Diamond Polishing Pad Set for Stone and Concrete
7 Packs Dry Diamond Polishing Pads 4 Inch with 5/8”-11 Rubber
Resin bond diamond polishing pads designed for granite, engineering stone, Dekton stone, marble and concrete counter tops. 7 pads set including #50-Grit, 100-Grit, 200-Grit, 400-Grit, 800-Grit, 1500-Grit, 3000-Grit. Optimum RPM is 2,200 RPM and recommended maximum is 4,500 RPM.
5 in. Dry Diamond Polishing Pad Set for Stone and Concrete
Looking for inexpensive wet diamond polishing pads to get the job done. They are economical but perform great for wet polishing of granite and marble. The entire set includes 50-Grit, 100-Grit, 200-Grit, 400-Grit, 800-Grit, 1500-Grit, 3000-Grit and a 4 in. semi-rigid back holder with Velcro for the diamond pads. The back holder has 5/8-11 thread to fit on most grinders and polishers in the U.S. With brass thread body it will not rust for wet use.
Applied Diamond Tools 4 in. JHX Wet Diamond Polishing Pads for Granite/Concrete (Set of 7) with 4 in. Semi-Rigid Back Holder
Triangle grinding pads designed for oscillating tools such as Fein grinders for corner and edge grinding and polishing.
EDiamondTools 3 in. Triangular Grinding Pads for Oscillating Tools, Vacuum Brazed Diamond, 3mm Segment Height, 30 Grit
Diamond Polishing Pads 5 Inch Wet Dry Set 8 Pieces for Marble