The Gelcoater GUPS Disposable Paint Cups System 20oz/600mL Case of 50

The Gelcoater GUPS Disposable Cup System all in one material prep system. Measure, mix, catalyze, filter and spray. Compatible with Gelcoater GUPS adapters & 3M PPS 16000 series. 1 full case = 1 x 20oz/600mL hard cup, 1 pce collar, 50 pcs cup liners, 50 pcs lids with built-in 125 micron filter, 21 pcs sealing caps.
COMPATIBLE WITH VIRTUALLY ANY SPRAY GUN! (SEE ADAPTER CHARTS) ALSO COMPATIBLE WITH FIRST GENERATION 3M PPS 16000 SYSTEM The Gelcoater GUPS Disposable Cup System is an all in one material preparation system that allows you to measure, mix, catalyze, filter and spray without needing to clean your cups.  You can even prepare multiple cups of material for rapid, successive spraying.  The GUPS System vastly reduces clean up time and cleaning solvent consumption therefore saving time AND money! Each full case comes with 1 hard outer cup and collar (for securing lids to hard cup), 50 lids with built-in 125 micron filter, 50 soft cup liners and 21 lid caps for sealing the assembled cups for temporary storage (storing of catalyzed material is not recommended). Directions for use:  1. Place a soft plastic liner inside the reusable hard cup.  2. Pour your material into the cup and mix if necessary.  3. Snap on a lid.  4. Screw the locking collar to the lid and cup.  5. Affix the appropriate adapter to your spray gun (see our Adapter Compatibility Chart).  6. Attach the cup assembly to the adapter on your gun and spray your job. Features: All-in-one material preparation system allows you to measure, mix, catalyze, filter and spray without the need to clean your cups! Accurately pre-measure your material ahead of time in the graduated cup instead of in the middle of the job and rapidly spray successive batches! No need for separate mixing cups and filters saves money and time. Spray large amounts of material quickly by pre-measuring into as many cups as you need without having to clean any of them! Reduce contamination with 125 micron filters built into the lid! Contamination is further reduced by using a fresh lid and liner for each spray! Vastly reduce clean up time by eliminating the need to clean your cups! With no cup to clean you vastly reduce the amount of solvent used in your cleanup! Specifications: Graduated hard cup:  20oz / 600mL (25oz / 750mL maximum capacity) Soft liners for hard cup:  20oz / 600mL (25oz / 750mL maximum capacity) Cup lids:  125 micron filter (built-in) Compatible with Gelcoater GUPS adapters & 3M PPS 16000 series (1st Gen.). Package Contents: 1 full case = 1 piece 20oz/600mL hard cup, 1 piece collar for hard cup, 50 pieces cup liners, 50 pieces lids with built-in 125 micron filter, 21 pieces sealing caps for lids.

Disposable Paint Gun Cups

Sea Line S08 Industrial Force Cut Polishing Paste, 2.2lb / 1kg pail – The Gelcoater

NEW Disposable Spray Paint Gun Plastic Liners & Lids Kits 20-Ounce 600ML Cups

Disposable Paint Gun Cups

20-Ounce (600ML) Spray Gun Liners & Lid Kit. • Disposable Cup Liners20-Ounce (600ml). Check out the link below. • Disposable Lids (With Strainer).

NEW Disposable Spray Paint Gun Plastic Liners & Lids Kits 20-Ounce 600ML Cups

Disposable Paint Gun Cups

DIER YEE 600ml Disposable Paint Spray Gun Cup for Automotive Paint Gun, HVLP Paint Spray Paint Gun, 10 Pack Standard Size 20 Ounce Kit - 10 Cup Liners, 10 Lids with

Master Paint System MPS Disposable Paint Spray Gun Cup Liners and Lid System, 40 Pack Standard Size 20 Ounce (600ml) Kit

Sea Line S08 Industrial Force Cut Polishing Paste, 2.2lb / 1kg pail – The Gelcoater