Free STL file Balsa wood cutter 1- 5 mm thickness 🪵・3D print

Free STL file Balsa wood cutter 1- 5 mm thickness 🪵・3D print

4.5
(290)
Write Review
More
$ 0.99
Add to Cart
In stock
Description

All the balsa cutters in Denmark was should out, so I decided to make my own. It was designed to be used as a balsa cutter, but it might work just as fine as a leather strip cutter. They cut strips with a width of 1 mm, 2 mm, 3 mm, 4 mm and 5 mm. If you want other widths, then feel free to contact me here on Cults3D, and I will see what I can do. You need two M4 screws and two M4 bolts to assemble this model. And a blade for cutting, almost any blade will due. Feel free to go and check out my profile for more printable stuff for your model cars and scale dioramas. These models are NOT for comercial use. If you have any inquiries, then please take it with the designer of these models.

Free 3D file Balsa Chopper 🛠️・3D print design to download・Cults

Free 3D file Balsa Chopper 🛠️・3D print design to download・Cults

Free STL file Balsa wood cutter 1- 5 mm thickness 🪵・3D print design to download・Cults

Balsa Strip Cutter by sdfgeoff, Download free STL model

▷ balsa stripper 3d models 【 STLFinder 】

balsa chopper 3D Models to Print - yeggi

For left and right handed individuals., Using rectangular blades that can be flipped allowing you to use both ends., Cuts 1/8 inch strips and up,

Balsa Wood Strip Cutter

Free 3D file Balsa Chopper 🛠️・3D print design to download・Cults

BALSA WOOD Strip Cutter - Instructables

For cutting balsa sticks from boards, rc aircraft or rc shipbuilding.

Balsa rod cutter modele reduit RC