Ash Veneer Edgebanding

Ash hardwood veneer edgebanding. 10mil thick with two backing options, Hot-Melt Glue or Paper-Back. Cover any cheap plain wood to make it look like its made of solid ash hardwood.
Ash wood veneer edge banding Sold in three widths 7/8”, 1, and 2. Purchase by the 25 foot section or by the full roll. HM Glue full rolls are 250’. Full roll of paper back edgeband is 500’.  For multiple units purchased, the longest possible continuous piece will be sent.  If a specific length is required, please contact us. Felt/Paper Backer: This edgeband will adhere to most surfaces. Rough sanding is necessary on smooth surfaces before applying. It is recommended to apply a thin layer of contact cement to both the surface being covered and the edgebanding. The contact cement should be tacky before applying edgebanding to surface, this should only take a few minutes. Gently press edgeband onto the surface and work out any air bubbles with gentle pressure. Full roll with this backer is 500’. Hot Melt Glue Backer: A high quality EVA hot melt adhesive is on the back. There is no additional adhesive needed with this glue. This edgeband will adhere to most surfaces. Rough sanding is necessary on smooth surfaces before applying. Before applying hot iron, cover with cotton cloth. It is recommended to move the hot iron in a circular pattern until adhesive adheres to surface. Scorching will occur if hot iron is left too long in one spot. Full roll with this backer is 250’.

Ash White Wood Veneer Edgebanding Thick - JSO Wood Products

Teak Veneer Burma Teak Natural Veneers Myanmar Teak Sliced Veneer For Furniture Doors & Plywood - Jiashan Shunfang Woodworks Co., Ltd.

Formwood Wood Veneer Edgebanding

Veneers & Edge-Banding - Florida Southern Plywood

Jiashan Shunfang Woodworks Co., Ltd. - Veneer, Wood Veneer, Edgebanding

Craftsmen Hardwoods Inc.

Uniboards

Ash Veneer French European Figured Quartered Wood

ash veneer sheets 0.2mm 0.5mm fleece back engineered ash veneer

Ash Automatic 15/16-in 500-ft Roll - Auto Wood-Edgebanding

1MM Ash wood veneer edgebanding 1.75 x 10' feet with no adhesive nonglued no backing 1/24 thickness. Grain may be straight or wide. Other widths,

Ash 1MM thick wood veneer edgebanding 1-3/4 x 120 nonglued .040 thickness