Airgas - HARE70S6E8 - .030 ER70S-6 Harris® Carbon Steel MIG Wire 33 lb 12 Spool

Harris® ER70S-6 .030 dia Carbon Steel MIG Welding Wire comes on a 33 lb spool of 12 dia. It contains deoxidizers that provide better wetting, a flatter bead shape and faster travel speeds. General purpose wire is used with 100% carbon dioxide, 75/25 shielding gas or with higher contents of argon like 90/10 for fabrication of mild steel. Wire conforms to AWS A5.18 ER70S-6.

Harris ER 70S-6 MIG Welding Wire .030 on 33 lb. Spools

PGN Solid MIG Welding Wire - ER70S-6 .030 Inch - 10 Pound Spool - Mild Steel MIG Wire with Low Splatter and High Levels of Deoxidizers - For All Position Gas Welding

ER 70S-6 mild steel MIG GMAW welding wire is a high strength mild steel MIG wire. Ideal for auto body repair and fabrication on most ferrous metals. Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel. Produces a smooth bead which requires less grinding. Not recommended for aluminum engines. Required Shielding Gas Argon/CO2.

Forney ER70S-6 Mild Steel MIG Wire, 0.035 in., 33 lb. 42281

Airgas - RAD64004186 - .035 ER70S-6 RADNOR™ P/3™ S-6 Carbon Steel MIG Wire 33 lb 11.75 Spool

Airgas - RAD64004042 - .035 ER70S-6 RADNOR™ ER70S-6 Carbon Steel 33 lb 12 Spool

MIG WELDING WIRE

IBELL MIG - AWS ER70S-6, 0.8MM, 5KG, Spool Carbon Steel Mig Solid Welding Wire

HOBART MIG welding wire is a premium carbon steel wire for general-purpose welding designed for use on mild steel. Deposits require minimal slag

Hobart 33 lb. Carbon Steel Spool MIG Welding Wire with 0.035 Diameter and ER70S-6 AWS Classification

Airgas - RAD64004042 - .035 ER70S-6 RADNOR™ ER70S-6 Carbon Steel 33 lb 12 Spool

Airgas - RAD64004186 - .035 ER70S-6 RADNOR™ P/3™ S-6 Carbon Steel MIG Wire 33 lb 11.75 Spool

Airgas - ESA35FA12982V - .045 E316LT1-1 SHIELD-BRIGHT® 316L Gas Shielded Flux Core Stainless Steel Tubular Welding Wire 33 lb Spool

ER70S-6 - Weld WireWeld Wire

***READ THIS BEFORE YOU BUY*** Carefully check dimensions shown on picture #2 and make sure this spool will fit your welder. ER70S-6 is the most

ER70S-6 - MIG Mild & Low Alloy Steel Welding Wire - 33 Lb x 0.030