AQUASEAL 8 oz Buy McNett at DIVESEEKERS.COM 888-SCUBA-47 – Scubadelphia DiveSeekers.com

Scubadelphia Diveseekers is your one stop shop for all of your snorkeling gear, recreational scuba gear, technical diving gear, rebreather gear, Dive Travel, Dive Training and equipment repair. Recently voted as one of the TOP 10 Dive Centers by Diving Equipment Manufacturers Association (DEMA) you can count on us as the Dive Professionals you can trust.

Clean damaged area with Cotol-240™ Cure Accelerator/Precleaner or solvent (paint thinner, nail polish remover or similar).

Trim loose threads. Non-fabric surfaces should be roughened with sandpaper, then cleaned. Apply Aquaseal® to surfaces directly from tube or with knife or flat stick. Keep repair level overnight. Avoid contact with other surfaces.

Most repairs reach full strength overnight (10-14 hours). Allow longer for thickest repairs. For fastest cure (2 hours or less), mix in Cotol-240.

HOLES AND TEARS: Create backing with removable tape. Fill void and 1/4 beyond edge with Aquaseal. Remove tape after full cure.

SEAMS: Apply 1/16 thick bead overlapping seams edges by at least 1/4. Apply with slight pressure to saturate fabric surfaces.

HIGH WEAR AREAS: Apply thin coat with knife for flexible abrasion resistance.

WARNING: FULLY CURED AQUASEAL IS SLIPPERY WHEN WET. For added traction on footwear, sprinkle sand on uncured Aquaseal 1/2 hour after applying.

CLEAN UP: To remove Aquaseal from hands, buff with cloth soaked in paint thinner, nail polish remover or 99% isopropyl alcohol.

STORAGE: Advance contents to tube neck. Wipe clean and cap. Keep in cool, dry place; for extended life, place in freezer. To thaw or for easier-flowing contents, soak tube in warm water for 15 minutes.

The industry standard for maximum strength repairs to wet suits, dry
suits and all watersports products. Flexible urethane formula
waterproofs, seals and protects against abrasion. Hundreds of
watersports and household uses. For fast cure, use with Cotol-240™ Cure
Accelerator. 8 oz tube.

Clean damaged area with Cotol-240™ Cure Accelerator/Precleaner or solvent (paint thinner, nail polish remover or similar). Trim loose threads. Non-fabric surfaces should be roughened with sandpaper, then cleaned. Apply Aquaseal® to surfaces directly from tube or with knife or flat stick. Keep repair level overnight. Avoid contact with other surfaces. Most repairs reach full strength overnight (10-14 hours). Allow longer for thickest repairs. For fastest cure (2 hours or less), mix in Cotol-240. HOLES AND TEARS: Create backing with removable tape. Fill void and 1/4 beyond edge with Aquaseal. Remove tape after full cure. SEAMS: Apply 1/16 thick bead overlapping seams edges by at least 1/4. Apply with slight pressure to saturate fabric surfaces. HIGH WEAR AREAS: Apply thin coat with knife for flexible abrasion resistance. WARNING: FULLY CURED AQUASEAL IS SLIPPERY WHEN WET. For added traction on footwear, sprinkle sand on uncured Aquaseal 1/2 hour after applying. CLEAN UP: To remove Aquaseal from hands, buff with cloth soaked in paint thinner, nail polish remover or 99% isopropyl alcohol. STORAGE: Advance contents to tube neck. Wipe clean and cap. Keep in cool, dry place; for extended life, place in freezer. To thaw or for easier-flowing contents, soak tube in warm water for 15 minutes. The industry standard for maximum strength repairs to wet suits, dry suits and all watersports products. Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of watersports and household uses. For fast cure, use with Cotol-240™ Cure Accelerator. 8 oz tube.

Aquaseal 8 oz - Extreme Exposure

AQUASEAL, Leather Boot Care

Easily repair tears and rips in your favorite waders and outdoor gear using this Aquaseal Repair Adhesive. It is a clear waterproof sealant specially formulated for the flexibility, adhesion and abrasion protection you need to keep you going. This urethane repair adhesive will patch that hole in your raft, fix the gash in your fishing waders and make sure you stay dry. You can also use it to replace gaskets on boats, or add abrasion-resistant layers on your boating gear.

Aquaseal Repair Adhesive

Accessories – Scubadelphia DiveSeekers.com

Gear Aid Aquaseal FD Adhesive (8 oz)

Gear Aid Aquaseal FD Adhesive (8 oz)

Gear Aid Aquaseal FD Adhesive (8 oz)

GEAR AID Aquaseal FD Flexible Repair Adhesive for

GEAR AID Aquaseal FD Flexible Repair Adhesive for