Designed to pull 50–60 pounds of tension on their blades, which makes it much stronger, and the blades vibrate less than our Mk3 saws. They are are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant.
Designed to pull 50–60 pounds of tension on their blades, which makes it much stronger, and the blades vibrate less than our Mk3 saws. They are are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant.
The Cam Lever Tension is designed for rapid, repetitive blade changes (when piercing for example). The tension does not change when re-setting the blade. Simply flip the lever forward to release tension, re-position and clamp the blade, and flip the lever to the rear, and you are sawing.
The Swivel Blade Clamps can rotate the saw blade a full 360°, with click stops every 45°.
SKU: | 124.005CS |
UPC: | 196943890034 |
Brand: | Knew Concepts |
MPN: | 124.005CS |
Made In: | United States |
Knew Concepts 3” Mk.IV Heavy Duty Fret Saw With Lever Tension And
5 Inches Woodworker Fret Saw - Handsaws
Knew Concepts Fret Saws
Knew Concepts 5 Titanium Birdcage Fret Saw with Lever Tension
Knew Concepts revolutionized the fret saw world with the introduction of their line of US made patented coping saws. These saws are perfect for luthiers, model builders and fine woodworkers, These saws excel when performing fine coping work and when removing the waste between hand cut dovetails. These saws are made from 3/16 thick milled aluminum with a red baked on power coat finish.
Knew Concepts 125.012 MK IV 6.5 Cam Lever Rotating Blade Coping Saw with 12 Each 18 TPI Pegas Fret Saw Blades (DCE)
Knew Concepts fret saws
Fixed blade position model; Blade does not rotate Lightweight, maneuverable, and easy to adjust. Cam Lever Tension is designed for rapid, repetitive blade changes Supplied with a 15 TPI #7 skip-tooth blade Unique blade holder makes blade changes and tensioning simple Designed for rapid, repetitive blade changes (when piercing for example). The tension does not change when re-setting the blade.
Knew Concepts 3” Mk.III Fret Saw with Lever Tension
Knew Concepts Saws
Equipment and Capabilities
Knew Concepts 5” Titanium Birdcage Fret Saw With Lever Tension And Swivel Blade Clamps
Knew Concepts Mk.IV Precision Crafted Saws
Knew Concepts Saw - Mark IV Heavy Duty Lever Tension 8 inch
Knew Concepts revolutionized the fret saw world with the introduction of their line of US made patented fret and coping saws. These saws are perfect for jewelers, luthiers, model builders and fine woodworkers, These saws excel when performing fine scroll saw work and when removing the waste between hand cut dovetails. These saws are made from 1/8 thick milled aluminum with a red anodized finish.
Knew Concepts 5” Mk.III Fret Saw with Screw Tension